Loading ...
Loading ...
Loading ...
EN 5
Power/Bluetooth
LED indicator
Description
Blinking white
quickly
Ready for pairing
Blinking white
slowly
Reconnecting the last
connected device
Solid white Connected
Note
• To disconnect a device, press and hold
for 3 seconds until the Power/
Bluetooth LED indicator blinks white
quickly.
• To clear the pairing information, press
and hold for 8 seconds until the
Power/Bluetooth LED indicator blinks
white slowly for 3 times.
• Pair the speaker to two devices,
e.g. mobile phone and notebook.
Pairing
• Music can only be played from one
device at a time. The other device
will be reserved for phone calls.
• Pause the audio from one device to
start playing audio from the other
device.
Switch between devices
Note
• Receiving a call on Device 2 will pause
playback on Device 1. The call will be
routed automatically to your speaker.
• Ending the call will resume playback
from Device 1 automatically.
Multi-point connection
4 Play from
Bluetooth
devices
1
Press to turn the speaker on. It
will enter Bluetooth pairing mode
automatically. You can also press
and hold
for 3 seconds to enter
Bluetooth pairing mode.
2
Enable Bluetooth and select
"Philips S4807" in the Bluetooth
list on your device for pairing.
If a message prompts for
permission for Bluetooth
connection, conrm it.
If a password is required, enter
0000 and then conrm.
3
Play audio on your Bluetooth
device to start music streaming.
Play from Bluetooth
devices
With this speaker, you can enjoy audio
from your Bluetooth device.
Note
• Make sure that the Bluetooth function
is enabled on your device.
• The maximum distance for pairing the
speaker and your Bluetooth device is
20 meters (66 feet).
• Keep away from any other electronic
device that may cause interference.
Loading ...
Loading ...
Loading ...