Loading ...
Loading ...
Loading ...
Page 5
GENERAL SAFETY INSTRUCTIONS
Position the Jack
Position the jack to only lift on the areas of the
vehicle as specified by the vehicle manufacturer.
Always Use Jack Stands
After lifting the vehicle always support the load with appropriately rated vehicle Jack stands before
working on the vehicle.
Do Not Overload Jack
Do not overload this jack beyond its rated capacity. Overloading this jack beyond its rated capacity
can cause damage to or failure of the jack.
Always Use on Hard Level Surfaces
This jack is designed only for use on hard level surfaces capable of sustaining the load. Use on
any surfaces other than hard level surfaces can result in jack instability and possible loss of load.
Chock and Block (Stabilize)
Apply parking brake in vehicle before operating jack.
A chock is a wedge for steadying an object and holding it motionless, or for preventing the
movement of a wheel. Chock the wheel opposite the end being lifted.
When you block a load, you secure and support a load that is being lifted. The block(s) or stabilizer(s)
should have a weight capacity that is greater than the weight of the load which is being lifted.
Center Load on Jack Saddle
Center load on jack saddle before lifting vehicle.
Off-center loads and loads lifted when the jack is not level can cause loss of load or damage to
the jack.
Do not raise or lower the vehicle unless tools, materials and people are clear.
When the lift is being lowered, make sure everyone is standing at least six feet away. Be sure
there are no tools or equipment left under or around the jack before lowering.
Always lower the jack slowly.
DO NOT USE THE JACK TO SUPPORT OR STABILIZE A LOAD.
Using the jack to support or stabilize a load may result in unexpected movement and result in
serious injury,
being crushed and death. Always securely chock and block (stabilize) the load to be lifted. Never
place any part of the body under a raised load without properly chocking and supporting the load.
Never use the jack on curved or tubular vehicle Bumpers.
This will result in the vehicle slipping off the jack and falling, causing serious injury or death. Use
a bumper lift to lift most vehicles with curved bumpers or plastic bumpers.
Wear ANSI-approved safety glasses and heavy-duty work gloves during use.
Do not adjust the safety valve.
Do not move or dolly vehicle while jack is in use.
Stay alert. Use caution and common sense when operating jack. Do not use a jack when
tired, incoherent, dizzy, under the use of drugs or alcohol.
Training
Read this manual before use. Do not allow anyone who has not read this manual, and/or does not
understand the requirements, to use the jack.
Spectators
Do not allow bystanders around the jack of under the load supported only by the jack.
Do not allow anyone in the vehicle while the jack is in use. Keep all bystanders away from vehicle
when in use.
Inspection
Inspect the jack carefully before each use. Ensure the jack is not damaged, excessively worn, or
missing parts.
Do not use the jack unless it is properly lubricated. Using a jack that is not in good clean working
condition or properly lubricated may cause serious injury.
Additional Notes:
Save the receipt, warranty and these instructions.
Do not modify the jack in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the equipment. There are specific applications for which the jack
was designed.
Always check for damaged or worn out parts before using the jack. Broken parts will affect
the equipment operation. Replace or repair damaged or worn parts immediately.
When jack is not in use, store it in a secure place out of the reach of children. Inspect it for good
working condition prior to storage and before reuse.
Loading ...
Loading ...
Loading ...