Loading ...
2
Table of Contents
Safety Information ...........................2
Warranty
One Year Limited Warranty ...................4
Warranty Claim Procedure ....................4
Pre-Installation
Tools/Materials Required .....................5
Package Contents ..........................6
Hardware Included ..........................6
Planning Installation .........................7
Installation ................................10
Operation .................................13
Maintenance
Replacing Filters ..........................14
Replacing Lights ...........................14
Care and Cleaning
Range Hood ..............................15
Filters ...................................15
Troubleshooting ...........................16
Specications
Wiring Diagram ...........................17
External Range Hood Diagram ...............18
Service Parts ..............................19
Safety Information
READ AND SAVE THESE INSTRUCTIONS
Warning - To reduce the risk of re, electric shock, or
injury to persons, observe the following:
1. Use this unit only in the manner intended by the manufacturer.
If you have any questions, contact the manufacturer.
2. Before servicing or cleaning unit, switch power off at service
panel and lock service disconnecting means to prevent
power from being switched on accidentally. When the service
disconnecting means cannot be locked, securely fasten a
prominent warning device, such as a tag, to the service panel.
3. Installation work and electrical wiring must be done by
qualied person(s) in accordance with all applicable codes
and standards, including re-rated construction.
4. Sufcient air is needed for proper combustion and exhausting
of gases through the ue (chimney) of fuel burning equipment
to prevent back drafting. Follow the heating equipment
manufacturer’s guideline and safety standards such as those
published by the National Fire Protection Association (NFPA),
and the American Society for Heating, Refrigeration and
Air Conditioning Engineers (ASHRAE), and the local code
authorities.
5. When cutting or drilling into a wall or ceiling, do not damage
electrical wiring and other hidden utilities.
6. Ducted fans must always be vented to the outdoors.
WARNING: FUEL (GAS) BURNING RANGES MUST BE
VENTED OUTDOORS USING, AT MINIMUM, METAL
DUCTWORK AND RANGE HOODS OF SUFFICIENT CAPACITY.
Follow your fuel burning equipment manufacturer’s guidelines, as
well as, all applicable safety standards published by the National
Fire Protection Association (NFPA), and the American Society for
Heating, Refrigeration and Air Conditioning Engineers (ASHRAE),
and your local code authorities.
DANGER: Turn off the power circuit breaker
or the power switch on the junction box before
installing or servicing this unit. Touching circuitry
inside the range hood while it is energized will result
in death or serious injury.
DANGER: All electrical wiring must be properly
installed, insulated, and grounded. Improper
insulation and grounding will result in deadly
electrical shock.
DANGER: If installing this unit over a gas range,
turn off the gas at the source before installing or
servicing this unit.
WARNING: Attempting to install or service this
unit when you do not have the necessary technical
or electrical background could result in personal
injury.
WARNING: The unit has sharp edges. Always
wear safety gloves during installation, cleaning, or
servicing.
WARNING: Always leave safety grills and lters
in place. Without these components, operating fans
could catch on to hair, ngers, or loose clothing.
WARNING: Stay clear of the rotating fan when the
motor is running.
WARNING: Keep this appliance clean and free of
grease and residue build-up at all times to prevent
res.
CAUTION: This device is for general ventilating
use only. Do not use to exhaust hazardous or
explosive materials and vapors.
Loading ...
Loading ...
Loading ...