Loading ...
Loading ...
Loading ...
23
EN
GENERAL USE
Note: The appliance can be operated either by the switches located on the top right
hand side of the re or by the supplied remote control.
Manual Operation
• This is done by operating the switches located at the top right hand side of the re
.The standby rocker switch must rst be switched on, the re will beep to indicate
that it is powered up.
• Press the O/I button once to turn on the appliance and re effect. A red indicator
light will show to indicate that the re is ON. Press the O/I button for 3 seconds this
will operate the dimmer mode, hold the button down until the desired brightness is
obtained.
• Press the POWER button once for the low heat setting 1000W; press twice for the
high heat setting 2000W; press three to switch off the heat setting.
• Press the BACK LIGHT button to adjust the colors of LED decoration, 7 colors
available.
Remote Operation
The standby rocker switch located at the top right hand
side of the re must rst be switched on; the re will
beep to indicate that it is powered up.
It takes a little time for the receiver to respond to the
transmitter. Do not press the buttons more than once
within two seconds for the re to operate normally.
Loading ...
Loading ...
Loading ...