Loading ...
Loading ...
Loading ...
7
ASSEMBLY INSTRUCTIONS
10
10. Locate the left and right door (S & T). Attach
the handle (GG) to left and right door (S
& T) by inserting a bolt (FF) through the
hole in the door. Tighten the bolt (FF) with
a screwdriver. Line up hinge cups on the
cabinet doors (S & T) with the hinge plates
in the left and right side panels of the media
console. Slide the hinge plates over the
hinge cups as shown and tighten them with
the screws provided on the hinge plates.
Adjust the vertical height by loosing the four
“A” screws, in the diagram, on both hinges.
Two of them are usually in slotted holds
which allows you to adjust up or down by
a few mm. Then tighten the screws again.
Adjust the depth by loosing “B” screw, in
the diagram, and adjust the door. If the door
cannot be adjusted, please loosen screw
“C”, as shown in the diagram, then try again.
Tighten screw “B” and “C” as shown in the
diagram. Adjust the cabinet doors sideways
by turning the screw “C” on both hinges on
each door.
11. Insert twelve shelf pins (DD) into the interior
of the side panels and media shelf. Insert
the pins parallel to one another to ensure
the shelves are level. Carefully place four
adjustable shelves (N) onto the shelf pins
(DD). Carefully place the adjustable media
shelf (H) on the shelf pins (DD).
12. Insert the rebox into the mantel through
the back opening. Push the rebox forward
through the back opening until the metal trim
of the rebox in ush with the side panels.
Once the rebox is in position attach the two
mounting brackets included with the rebox
by inserting and tightening four screws
through the mounting brackets into the
rebox and the base panel.
11
12
S
T
FF
DD
N
N
H
GG
Loading ...
Loading ...
Loading ...