Brushed Stainless Steel
Oval Wall Cookware Rack
Model CROW-25B
Beautifully display Cuisinart
®
Cookware and
keep it within easy reach. This Cuisinart
®
Brushed Stainless Cookware Rack eliminates the
need to bend down to stack and store cookware
in cupboards. The solid brushed stainless rack is
easy to install and designed to last a lifetime.
Enclosed you will nd everything needed for the proper assembly and use of your cookware rack. The parts and
hardware included are:
1 - Oval Wall Base 1 - ½" Nut 2 - 2½" Lag Screws with Washers
1 - Mounting Arm 1 - Lock Washer 6 - Angled Pot Hooks
1 - Sheetrock Anchor 1 - Sheetrock Anchor Screw
ASSEMBLY AND INSTALLATION INSTRUCTIONS
Please proceed carefully using the following instructions to ensure this rack is assembled properly for safe
installation and use and without damage to the nish. Haste in assembly could result in needless scratching
or marring of the stainless steel nish.
1. Unwrap rack and mounting arm from plastic covering.
2. Attach the arm to the rack body, using the lock washer and ½" nut. Tighten securely.
3. Identify mounting location and ensure at least the two base mounting holes are located directly over wall studs
(wood studs).
4. Position rack assembly in desired location and mark fastening locations for base and mounting arm using rack
holes provided.
5. Drill mounting holes and mount rack according to your situation:
a. For all-wood installation
i. Drill three holes as marked using a
7
⁄32" drill bit (not provided).
ii. Hold rack in position (you may want assistance during this step) and fasten base to wall rst using the
2½" lag screws and washers provided. Tighten securely.
iii. Finish by securing the mounting arm with the third 2½" lag screw and washer, tighten securely.
b. For wood and sheetrock installation
i. Ensure base mounting holes are located over wood wall studs.
ii. Drill base mounting holes as marked using a
7
⁄32" drill bit (not provided).
iii. Drill mounting arm hole as marked using a
3
⁄8" drill bit through sheetrock and install provided sheetrock
anchor.
iv. Insert small washer on screw rst, then larger washer second. Pass through bracket mounting hole
and attach anchor to screw.
WARNING:
PLEASE READ ALL INSTRUCTIONS
BEFORE ASSEMBLING AND INSTALLING
YOUR NEW COOKWARE RACK
Rack Size: 27½" Length x 10" Width x 15" Height
OVER PLEASE
Mounting Arm
Anchor
Base
½" Nut
Pot Hooks
Sheetrock Anchor Screw
Lock Washer
2½” Lag Screws
with Washers
v. Hold rack in position (you may want assistance during this step) and fasten base to wall rst using the
2½" lag screws and washers provided. Tighten securely.
vi. Finish by securing the mounting arm with the provided sheetrock anchor. Push toggle through
sheetrock and tighten screw securely.
6. Your rack is now ready for use. Hang the angled pot hooks on the rack and distribute the weight of your 6
pieces of cookware evenly around the rack. Each hook can hold up to 5 lbs. Do not overload.
7. The care and cleaning of our cookware racks must be done with a low-abrasive cleaner. A periodic cleaning
will restore your rack to its original brilliance.
Note: The lag screws for the base must go into the solid wood of wall studs or into a wooden wall. The mount-
ing arm must be secured with the lag screw for wood or the anchor/screw for sheetrock based on your situation.
To install otherwise is incorrect. Your local hardware store can advise you if special hardware is needed for your
particular situation.
WARNING
It is important that your cookware rack be assembled and installed according to the above
directions. If the unit is assembled and/or installed incorrectly, it could become unstable, collapse and possibly
cause injury. Cuisinart is not responsible for any damage due to improper assembly or installation.
© 2021 Cuisinart
Glendale, AZ 85307
Printed in China 21CW004708
WARRANTY
LIFETIME WARRANTY (U.S. and Canada Only)
Your Cuisinart
®
Cookware Rack is warranted to be free of defects in material and workmanship under normal home
use from the date of original purchase throughout the original purchaser’s lifetime.
HASSLE-FREE REPLACEMENT WARRANTY
Your ultimate satisfaction in Cuisinart products is our goal, so if your Cuisinart
®
Cookware Rack should fail
within the generous warranty period, we will repair it or, if necessary, replace it at no cost to you. To obtain a
return shipping label, email us at www.cuisinart.com/customer-care/product-assistance/product-inquiry.
Or call our Consumer Service Center toll-free at 1-800-726-0190 to speak with a representative. This warranty
excludes damage caused by accident, misuse or abuse, including damage caused by overheating, and it does
not apply to scratches, stains, discoloration or other damage to external or internal surfaces that does not impair
the functional utility of the Cookware Rack. This warranty also expressly excludes all incidental or consequential
damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
foregoing limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may
also have other rights, which vary from state to state.
CALIFORNIA RESIDENTS ONLY
California law provides that for In-Warranty Service, California residents have the option of returning a nonconforming
product (a) to the store where it was purchased or (b) to another retail store that sells Cuisinart
®
products of the same
type. The retail store shall then, according to its preference, either repair the product, refer the consumer to an
independent repair facility, replace the product, or refund the purchase price less the amount directly attributable to the
consumer’s prior usage of the product. If the above two options do not result in the appropriate relief to the consumer,
the consumer may then take the product to an independent repair facility, if service or repair can be economically
accomplished. Cuisinart, and not the consumer, will be responsible for the reasonable cost of such service, repair,
replacement or refund for nonconforming products under warranty.
California residents may also, according to their preference, return nonconforming products directly to Cuisinart for
repair, or if necessary, replacement, by calling our Consumer Service Center toll-free at 1-800-726-0190. To obtain a
return shipping label, email us at www.cuisinart.com/customer-care/product-assistance/product-inquiry.
Cuisinart will be responsible for the cost of the repair, replacement, and shipping and handling for such nonconforming
products under warranty.
