Loading ...
Loading ...
Loading ...
Page 30
Installation and Operation Manual - Escape 2100
ENGLISH
8.1.5 Mobile Home
It is strictly forbidden to install a unit with a single wall pipe in a mobile home.
APPLIANCE CLEARANCES WITH DOUBLE
WALL PIPE CONNECTOR
DISTANCES
17
FROM PIPE CONNECTOR
WITH DOUBLE WALL PIPE CONNECTOR
Canada USA Canada USA
A 9" (229 mm) 9" (229 mm) D 13 ¾" (349 mm) 13 ¾" (349 mm)
B 19" (483 mm) 19" (483 mm) E
29 ⅞" (759 mm) 29 ⅞" (759 mm)
C 10" (254 mm) 10" (254 mm) F 20 ¾" (527 mm) 20 ¾" (527 mm)
8.1.6 Mobile Home With Heat Shield AC02710 or AC02762
It is strictly forbidden to install a unit with a single wall pipe in a mobile home.W
APPLIANCE CLEARANCES WITH DOUBLE
WALL PIPE CONNECTOR
DISTANCES
17
FROM PIPE CONNECTOR
WITH DOUBLE WALL PIPE CONNECTOR
Canada USA Canada USA
A 3" (76 mm) 3" (76 mm) D 7 ¾" (197 mm) 7 ¾" (197 mm)
B 5" (127 mm) 5" (127 mm) E
15 ⅞" (403 mm) 15 ⅞" (403 mm)
C 3" (76 mm) 3" (76 mm) F 13 ¾" (349 mm) 13 ¾" (349 mm)
8.2 Floor Protection
This stove is designed to prevent the floor from overheating. However, it must be placed on a
non-flammable surface to protect the floor from hot embers that may fall during loading.
The floor protection must be a continuous, non combustible material, such as steel with a
minimum thickness of 0.015" (0.38 mm) or ceramic tiles sealed together with grout. Cement
board, brick, or any other approved or listed material suited for floor protection. No R factor
required.
A material is considered non-combustible when made entirely of steel, iron,
bricks, tiles, concrete, slate, glass or a combination of these materials.
Materials corresponding to ASTM E136 and UL 763 are considered to be
non-combustible materials with the exception of gypsum.
17
The pipe distances listed in this table refer to the distances obtained when the stove is installed in accordance with the appliance clearances
above mentioned.
Loading ...
Loading ...
Loading ...