Loading ...
Loading ...
Loading ...
Page 10
START / STOP THE CULTIVATOR
To start
1. Press the safety lock button.
2. Pull the bail switch toward the handle while
you hold the safety lock button.
3. Release the safety lock button.
To stop
1. Release the bail switch to stop the machine.
NARROW CULTIVATING WIDTH
The two outer tine blades can be removed
from the unit to allow a more narrow cultivat-
ing width.
1. Place tine (A) onto the shaft, and place tine
(D) onto the other side shaft.
2. Insert the hitch pin into the holes in order to
secure the tines to the tine shaft.
OPERATION TIPS
The cultivator can be used to break up gar-
den soil and prepare a seedbed for planting.
Plan ahead to leave enough room between
the seed rows to allow for machine cultivating
after the plants have grown.
• Several passes over the same path may be
required to reach the desired depth. Do not
try to dig too deeply in the rst pass.
• If the machine jumps or bucks, allow the
unit to move forward at a slightly faster rate
or install wheel assembly.
• If the cultivator stays and digs in at one
spot, try rocking it from side to side in order
to start it moving forward again.
• If the soil is very hard, water a few days
before cultivating. Avoid working the soil
when soggy or wet. Wait a day or two after
heavy rain for the ground to dry.
• Shallow cultivating less than 5cm. deep
can be used to disrupt weeds and aerate
soil, without injuring nearby plant roots. It
should be done often so that weeds do not
grow large and cause tangling in the tines
of the unit.
OPERATION
FIG. 5
FIG. 6
Battery pack
Safety lock button
Tine(D)
Tine(A)
Hitch pin
Flute
Bail switch
Loading ...
Loading ...
Loading ...