Loading ...
Loading ...
-3-
Note: Register your product on line at www.usstove.com. Save your receipt with your records for any claims.
doors as needed to clear the smoke and odor. If
the appliance is overred, the paint will discolor.
When installing your unit, take care in handling.
Clean with soap and water when the appliance is
not in use. Do not use any acids, abrasive cleaners
or scouring soap as these solvents wear and dull
the nish.
22. DO NOT ROUTE THE blower power SUPPLY CORD
NEAR OR ACROSS HOT SURFACES!
23. Canada Installations requires that this replace
must be installed with a continuous chimney liner
of 6 inch diameter extending from the replace
insert to the top of the chimney. The chimney liner
must conform to the Class 3 requirements of CAN/
ULC-S635, Standard for Lining Systems for Existing
Masonry or Factory-Built Chimneys and Vents, or
CAN/ULC-S640, Standard for Lining Systems for New
Masonry Chimneys.
24. Permanently seal any opening between the
masonry of the replace and the facing masonry.
25. Fireplace insert surround panels may be removed
to inspect replace insert and replace.
26. U.S. Stove Company requires installing smoke
detectors in the same room as the heater if not
already installed. Smoke expelled from the unit
by either paint curing, opening the fuel loading
door, or a negative pressure inside the home could
trigger the smoke detectors.
27. For further information on using your heater safely,
obtain a copy of the National Fire Protection
Association (NFPA) publication “Using Coal and
Wood Stoves Safely” NFPA No. HS-10-1978. The
address of the NFPA is 1 Battery March Park, Quincy,
MA. 02269.
27-1/8” (691 mm)
26-1/2” (673 mm)
13-1/4” (337 mm)
6.1”
(155 mm)
21-3/4”
(553 mm)
22-3/8”
(568 mm)
15-1/2”
(394 mm)
4-11/16”
(119 mm)
Dimensions
Loading ...
Loading ...
Loading ...