Loading ...
Loading ...
Loading ...
Page 5 of 6
ASSEMBLY INSTRUCTIONS (continued)
ASSEMBLY INSTRUCTIONS (continued)
● The shut-off delay is the length of time the light will stay at brightness after motion is detected.
● You can set the shut-off delay by rotating the “TIME” knob arrow so it points to the desired time setting (from 5
seconds to 3 minutes). To increase the shut-off delay, turn the knob clockwise. To decrease the shut-off delay,
turn the knob counterclockwise.
Shut-off Delay
Customization Options
Notes:
1. The sensitivity of the motion sensor will increase as the
environmental temperature gets cooler. For best
performance, gently clean the lens with a soft cloth every
1 or 2 months to ensure maximum sensitivity.
2. For best performance, install fixture at least 8 feet above
the ground. At such a height, the fixture will provide a
detection distance of up to 40 feet at 77 degrees
Fahrenheit. (See Fig.5)
Fig. 7
3. The sensor detects movement across a detection range
of 180 degrees. (See Fig.6)
4. The sensor will be more sensitive to motion across its
detection path than motion directly towards it. (See Fig.7)
5. To reduce possible nuisances, do not mount the fixture
near a heat source like an air conditioner, vent or furnace
exhaust, or in a direction facing any reflective object or
other nearby light source.
20`
8`
12`
40`
Where you install your fixture is important:
Be sure the light is mounted straight on the wall;
otherwise, the detection distance may be limited.
Fig. 5 Fig. 6
180˚
Motion
Least sensitive
Motion
Most sensitive
Sensor
Fig. 7
FUNCTION AND OPERATION (continued)
Assembly Kit
5347MM (1 SET) FOR 356-9221
5348MM (1 SET) FOR 356-9222
The following parts are available for re-order if damaged or missing. Call us toll-free at 1-800-887-6326
Spare Parts List:
AA
BB
DD
EE
FF
CC
Mounting Screw
X2
Mounting Strip
X1
Bolt Nut
X2
Mounting Bracket Screw
X1
Wire Nut
X3
Gasket
X1
Loading ...