Loading ...
Loading ...
Loading ...
9
9
USING YOUR BOTTLE STERILIZER & DRYER
USING YOUR BOTTLE WARMER
Sterli
ze
min
Dry
Sterilize/Dry
Steril ize/Dry
Fill
with
water
Sterlize
Dry
Sterilize/Dry
min
St erilize/Dry
STERILIZER & DRYING FUNCTION:
1. Plug in the appliance.
2. Fill the metal heater with
120-130 ml (4-4.4 oz) of water.
3. Place the bottle tube on top of
the base
Note: Do not place the bottles
directly into the sterilizer base.
Note: Always pour directly into the
heating plate.
4. Place the bottles upside down
into the bottle tube.
Note: Make sure the bottle mouths
are placed over the raised vents
5. Place the nipple shelf on top of
the tube.
6. Place bottle nipples and caps
on the shelf.
7. Place the sterilizer lid over
the shelf.
8.
9.
Tap the power icon to turn
on the sterilizer.
Tap the sterilizer/drying icon,
The display will show 50 minutes.
Press the ic
on again to change
between 40, 50, and 60 minutes.
In each, the sterilize cycle will
take approximately 10 minutes.
After choosing the desired set-
ting, wait a few seconds, and the
countdown will begin.
10. The sterilizer will beep when
completed.
Note: You can cook using
the steam from the
sterilize function by placing
food on the nipple shelf.
If there is still water left in the
heating element before the
drying cycle, use 10 ml (1/3 oz)
water less for your next use.
Loading ...
Loading ...
Loading ...