Loading ...
Loading ...
Window Mounting
.
o
Remove Chassis
To slide chassis from cabinet, hold cabinet
with left hand, while pulling on strap provided
at the front of the unit.
Do not remove formed foam at the front of the
unit.
_ml_Assemble Window
_Filler Panels
1. Place cabinet on floor, a bench, or a table.
2. Slide "I" section of window filler panel into
side retainer on the side of the cabinet (see
Figures 2-3). Do both sides.
STRAP NOTE: Do not use strap for lifting unit. It
is for sliding chassis WITHIN cabinet only (to aid
in cleaning, maintenance, etc.). Be CAREFUL of
sharp edges on coil fins.
FIG. 2
pIJ_TIC WINDOW FILLER
FRAME PANEL
SiDE
Install Top Angle and
;ide Retainers
1. Attach foam gasket to top angle and side
retainers as shown in FIG. 1.
t_[j
2. Insta!l top angle and side retainers m cabinet
as shown, using screws as shown.
FIG. I
FIG. 3
NR CONDmONER
CABINET
-4_ _
_NDOW
RULER
PANEL
3. Insert top and bottom legs of window filler
panel frame into channel in the top angle and
bottom rail. Do both sides.
4. Insert washer head locking screws (2) into
holes in top leg of filler panel frame (see
Step 6). Do not totally tighten. Allow leg to
slide freely. Screws will be tightened after
Step 6.
(continued)
Loading ...
Loading ...
Loading ...