Loading ...
Loading ...
Loading ...
Symbol Oven function Application
Moist Baking This function is designed to save energy during
cooking. For the cooking instructions refer to
"Hints and tips" chapter, Moist Baking. The oven
door should be closed during cooking so that the
function is not interrupted and to ensure that the
oven operates with the highest energy efficiency
possible. When you use this function, the tem‐
perature in the cavity may differ from the set tem‐
perature. The heating power may be reduced.
For general energy saving recommendations re‐
fer to "Energy Efficiency" chapter, Energy Sav‐
ing.This function was used to comply with the
energy efficiency class according to EN 60350-1.
When you use this function the lamp automati‐
cally turns off.
7. CLOCK FUNCTIONS
7.1 Clock functions table
Clock function Application
TIME OF DAY To set, change or check the time of day.
DURATION To set how long the appliance operates.
END To set when the appliance deactivates.
TIME DELAY To combine DURATION and END function.
MINUTE MIND‐
ER
To set countdown time. This function has no effect on
the operation of the appliance. You can set the MINUTE
MINDER at any time, also when the appliance is off.
7.2 Setting the time. Changing
the time
You must set the time before you
operate the oven.
Only the top oven works
without the set time.
The flashes when you connect the
appliance to the electrical supply, when
there was a power cut or when the timer
is not set.
Press the
or to set the correct
time.
After approximately five seconds, the
flashing stops and the display shows the
time of day you set.
To change the time of day press
again and again until starts to flash.
7.3 Setting the DURATION
1. Set an oven function and
temperature.
2. Press again and again until
starts to flash.
3. Press or to set the DURATION
time.
The display shows .
www.electrolux.com10
Loading ...
Loading ...
Loading ...