Loading ...
Loading ...
Loading ...
18
Oven Light
The oven light is a standard 40-watt appliance bulb. Before
replacing, make sure the oven and cooktop are cool and the
control knobs are in the off position.
To Replace:
1. Unplug range or disconnect power.
2. Turn the glass bulb cover in the back of the oven
counterclockwise to remove.
3. Turn bulb counterclockwise to remove from socket.
4. Replace bulb, then bulb cover by turning clockwise.
5. Plug in range or reconnect power.
Appliance Outlets (on some models)
The 120-volt appliance outlet located on the control console may
be used to run portable appliances placed on countertops beside
the range.
The outlet operates independently and is not affected by range
control settings.
NOTE: Do not place portable appliances on the cooktop. Damage
to the portable appliance could result if the cooktop is hot.
Appliance Outlet Circuit Breaker:
The circuit breaker for the appliance outlet on your range is located
next to the outlet. It is rated for 12 amps.
If the circuit breaker trips, it can be reset by pressing the switch. A
delay of several minutes may be required for the circuit breaker to
cool before it will reset.
TROUBLESHOOTING
First try the solutions suggested here or visit our website and reference the Customer Service section to possibly avoid the cost
of a service call.
www.maytag.ca
Operation
PROBLEM POSSIBLE CAUSES SOLUTIONS
Nothing will operate Power supply cord is unplugged. Plug into a grounded outlet.
Household fuse is blown, or a
circuit breaker is tripped.
Replace the fuse or reset the circuit breaker. If the problem
continues, call an electrician.
Cooktop will not operate The control knob is set
incorrectly.
Touch the display area on the control panel to select a cooking
surface before selecting a function.
The cooktop control lockout is
set.
See “Control Lock” in the “Cooktop Use” section.
Cooktop is turned off. The Power key was unintentionally touched. Press POWER
again. Reset the cooktop.
Cooktop cooking results not
what expected
Improper cookware being used See “Cookware” section.
Cooktop control set to incorrect
heat level
See “Cooktop Controls” in the “Cooktop Use” section.
Range is not level. Level the range. See the Installation Instructions.
Oven will not operate The electronic oven control was
set incorrectly.
See “Electronic Oven Controls” section.
Delay Start was set. See “Cook Time” section.
The oven control lockout is set. See the control lock keypad feature in the “Feature Guide”
section.
The range is in Demo Mode. Demo Mode will deactivate all heating elements. See “Demo
Mode” in the “Electronic Oven Controls” section.
Oven temperature too high or
too low
Oven temperature calibration
needs adjustment.
See “Oven Temperature Control” in the “Electronic Oven
Controls” section.
Oven indicator lights flash Needs service (oven indicator
lights are flashing).
See “Control Display” in the “Electronic Oven Controls”
section. If the indicator light(s) keeps flashing, call for service.
See cover for contact information.
Oven control displays
messages
Power failure (display shows
flashing time)
Clear the display. On some models, reset the clock, if needed.
See “Clock” keypad feature in the “Feature Guide” section.
Error code (display shows letter
followed by number)
Press the CANCEL keypad to clear the display. See “Control
Display” in the “Electronic Oven Controls” section. If it
reappears, call for service. See cover for contact information.
Loading ...
Loading ...
Loading ...