Loading ...
Loading ...
Loading ...
Cleaning and maintenance en
39
4. Pull the heat exchanger cover out by
its grip.
5. Carefully remove the filter mat from
the heat exchanger cover.
Note: Take care not to damage the
filter mat when doing this.
6. Use a soft brush to clean the heat
exchanger cover.
Note: Make sure that no dirt or
debris is left on the seal.
7. Rinse the filter mat under running
water and squeeze out the water
with your hand.
Notes
– If there are heavy deposits, you
can clean the filter mat carefully
with a vacuum cleaner.
– Only clean with clear water; do
not use cleaning products.
8. Position the filter mat fully on the
retainers in the heat exchanger
cover.
Notes
– Ensure that the filter mat is clean
and dry, and positioned on the
retainers as shown.
– The filter mat must not be put
back if misshapen, damaged or
reversed.
– You can order a new filter mat
from our after-sale services using
the spare part
number: 12022801. Contact
information for all countries can
be found in the enclosed after-
sales service directory.
9. If there is visible soiling, carry out the
following steps (optional):
a) Lift the middle tab on the insert
slightly.
Loading ...
Loading ...
Loading ...