Loading ...
Loading ...
Loading ...
PREPARING FOR USE
PREPARING FOR USE
WARNING
CAUTION
Solubility of the tablet detergents produced by different
companies can vary depending on the temperature
and time. Therefore, it is not recommended to use such
detergents in short programs. It is more suitable to use
powder detergents in such programs.
Should any problem, which you have not encountered
before, arise with the use of this type of detergents,
contact the detergent manufacturers directly.
When you give up using combined detergents
Fill the rinse aid compartment.
Set the suitable rinse aid setting.
Filling with rinse aid and making the setting
To fill the rinse aid compartment, open the rinse-aid
compartment cap.
Fill the compartment with rinse aid until MAX level
and then close the cap
.
Be careful not to overfill the rinse aid compartment
and wipe up any spills
.
In order to set rinse aid level, follow below steps:
WARNING
CAUTION
Use only those rinse aid materials which are allowed for
use in the machine. As rinse aid residues left as a result of
overflowing will create extremely high amounts of foam
and thus reduce the washing performance, remove the
excess amount of rinse aid by wiping it with a paper towel
or cloth.
RINSE-AID
Turn the knob to the “off” position.
Push the “Start/Pause” button and hold it down.
Turn the knob counter clockwise one step.
Hold down the “Start/Pause” button until the LEDs
flash twice.
The machine will display the current setting.
Set the level by pushing the “Start/Pause” button.
Turn the knob to the “off” position to save the setting.
The factory setting is “4”.
If the dishes are not drying properly or are spotted,
increase the level. If blue stains form on your dishes,
decrease the level.
Level Brightener Dose Indicator
1 Rinse-aid not dispensed Wash LED is on.
2 1 dose is dispensed End LED is on.
3 2 doses are dispensed Start/Pause LED is on.
4 3 doses are dispensed Wash and End LEDs are on.
5 4 doses are dispensed Wash and Start/Pause LEDs
are on.
14
Loading ...
Loading ...
Loading ...