Loading ...
Loading ...
Loading ...
en Cleaning and maintenance
8
Fitting the activated charcoal filter
1. Remove the metal grease filter.
2. Insert the screw through the wing nut and the sleeve.
Screw it into the centre of the intermediate floor.
Note: The screw, wing nut and sleeve are included
with the activated charcoal filter.
3. If the appliance has a spacer rail, remove this. Use a
screwdriver to push the two tabs on the intermediate
floor inwards.
4. Mask the activated charcoal filter using the enclosed
sealing strips.
5. Insert the activated charcoal filter at the rear, fold it
up and lock it in the centre using the wing nut. If the
appliance has a spacer rail, reinsert this.
6. Reinsert the metal grease filter.
Removing the activated charcoal filter
1. Remove the metal grease filter.
2. If the appliance has a spacer rail, remove this.
Unlock the activated charcoal filter with the wing nut
in the centre and remove it.
3. Replace the activated carbon filter and lock it in
place using the wing nut.
4. If the appliance has a spacer rail, reinsert this.
Reinsert the metal grease filter.
Trouble shooting en
9
3Trouble shooting
Tr oubl e s hoot i ng
Malfunctions often have simple explanations. Please
read the following notes before calling the after-sales
service.
:Warning – Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out and damaged power cables replaced by
one of our trained after-sales technicians. If the
appliance is defective, unplug the appliance from the
mains or switch off the circuit breaker in the fuse box.
Contact the after-sales service.
Malfunction table
--------
LED lights
Defective LED lights may be replaced by the
manufacturer, their customer service or a qualified
technician (electrician) only.
:Warning – Risk of injury!
The light emitted by LED lights is very dazzling, and can
damage the eyes (risk group 1). Do not look directly
into the switched on LED lights for longer than 100
seconds.
4Customer service
Cus t omer ser vi ce
When calling us, please give the product number (E
no.) and the production number (FD no.) so that we can
provide you with the correct advice. The rating plate
with these numbers can be found inside the appliance
(remove the metal mesh grease filter to gain access).
You can make a note of the numbers of your appliance
and the telephone number of the after-sales service in
the space below to save time should it be required.
Please be aware that a visit by an after-sales engineer
will be charged if a problem turns out to be the result of
operator error, even during the warranty period.
Please find the contact data of all countries in the
enclosed customer service list.
To book an engineer visit and product advice
Rely on the professionalism of the manufacturer. You
can therefore be sure that the repair is carried out by
trained service technicians who carry original spare
parts for your appliances.
Accessories
(not included in the scope of delivery)
Note: These instructions apply to several appliance
models. It may be the case that an optional accessory
that is listed does not apply for your appliance.
Note: Observe the installation instructions in the
accessory.
--------
Problem Possible cause Solution
The appliance
does not work
The plug is not
plugged in.
Connect the appliance to the
electricity supply
Power cut Check whether other kitchen
appliances are working
Faulty fuse Check in the fuse box to make
sure that the fuse for the appli-
ance is OK
The lighting does
not work.
The LED lights
are defective.
Call the after-sales service.
E no. FD no.
After-sales serviceO
GB 0344 892 8999
Calls charged at local or mobile rate.
IE 01450 2655
0.03 € per minute at peak. Off peak 0.0088 €
per minute.
Accessory Order number
Activated charcoal filter LZ 73050
Circulated air grille 095660
Loading ...
Loading ...
Loading ...