Loading ...
Loading ...
Loading ...
9
OPERATING INSTRUCTIONS
Operating Your Washer, continued
Follow the fabric care label instructions
on items to be dried.
For best results
NOTE
If the cycle is interrupted during spin, it will take
approximately 2-3 minutes for the door lock to release.
DO NOT force open the door.
NOTE
To provide the best care for your laundry, not every
setting or option is available with every cycle. If a
setting or option is not available for the cycle selected,
the indicator will not light.
CAUTION
ENTRAPMENT and TIP-OVER HAZARD
Do not leave the door open if there are small children
or pets present. An open door could entice children to
hang on the door or crawl inside the washer. If there
are no small children present, you may leave the door
ajar to prevent odor build up.
• A signal will sound at the end of the cycle if the
chime option has been selected.
• Remove items from the washer when the cycle
ends and place in dryer, line dry or dry fl at as
directed on the fabric care label.
• Excess wrinkling, color transfer or odors may
develop in items left in the washer after the cycle
has ended, if not removed promptly.
cancel
spin
speed
START
pause
soil
level
options
select
auto
temp
delay
start
To return to factory
settings, press these
two buttons at the
same time and
hold until the signal
sounds.
6 Select the appropriate cycle and settings for
the load.
• Turn the cycle selector knob in either direction to
select the cycle desired.
• The estimated cycle time, suitable wash and rinse
water temperatures, fi nal spin speed, soil level,
and options for each cycle will be indicated for the
cycle selected. See the “Washer Settings Chart” for
more details.
• To change the settings, press the temp, spin
speed and soil level buttons to scroll to the
desired settings.
• To select or delete an option, press options; then,
while the indicator is blinking, press select. The
indicator will light when the option has been se-
lected. It will no longer be lighted when the option
has been deleted.
• Adjustments to a cycle will be remembered and re-
called each time that cycle is selected in the future.
• If changes to the settings or options are attempted
after the cycle starts, you will hear several beeps
when the buttons are pressed. To change the
settings or options, press pause, make the new
selections and press START again.
• To change the cycle once the cycle has begun,
press cancel, select a new cycle, and press Start
again. Just turning the cycle selector knob will not
change the cycle.
• To stop the cycle, press cancel.
7 Start the washer.
• Close the door and press START. The washer will
not operate with the door open. “
PAU
” will be
displayed as a reminder to close the door.
• Select delay start to delay the beginning of the
cycle, if desired.
• As a safety measure, the door will automatically
lock during the entire wash cycle and the Door
Lock indicator will be lighted.
• “Touch Pause to Add a Garment”
To add a forgotten item to the wash drum, press
Pause and open the door. “
PAU
” will be displayed
alternately with the estimated remaining cycle time.
Add the item, close the door and press START to
resume the cycle.
Loading ...
Loading ...
Loading ...