Loading ...
Loading ...
Loading ...
16
TO REFRESH OR CLEAN INSIDE OF WASHER
To clean and freshen the washer, perform the system
clean cycle. For best results use the system clean cycle
once a month. To begin the cycle, press and hold the
spin speed and options buttons simultaneously for 10
seconds until the display changes to
“
CLn
”
.
REMOVE ALL ITEMS FROM WASH DRUM before
fi lling the detergent chamber with one (1) cup of liquid
chlorine bleach OR one (1) pouch of TIDE
®
WASHING
MACHINE CLEANER. DO NOT use both. Press START
to begin.
Inside Routine Cleaning (Preventive)
To help prevent odors, mold or mildew, leave the door
open for a few hours after use or whenever the washer
is not in use.
CARE AND CLEANING
WARNING
HARMFUL VAPOR HAZARD
Do not use or mix liquid chlorine bleach with other
household chemicals such as toilet cleaners, rust
removers, acid or products containing ammonia. These
mixtures can produce dangerous fumes which can
cause serious injury or death.
CAUTION
ENTRAPMENT and TIP-OVER HAZARD
Do not leave the door open if there are small children
or pets present. An open door could entice children to
hang on the door or crawl inside the washer. If there
are no small children present, you may leave the door
ajar to prevent odor build up.
IMPORTANT
Items left in washer while performing the clean
washer cycle will cause a severe out-of-balance
situation that could damage the washing machine.
NOTE
If the system clean cycle is cancelled or paused
during the cycle, the washer will go through 2 rinse
cycles to clean the drum of any residual bleach before
unlocking the door.
cancel
spin
speed
STAR T
pause
soil
level
options
select
auto
temp
delay
start
Press and hold both for ten seconds
to enter system clean cycle.
For best results
Immediately follow up with a rinse & spin
cycle. Select fresh rinse on max spin speed
with no detergent or bleach to help clear any residual
bleach left after the system clean cycle.
Loading ...
Loading ...
Loading ...