Loading ...
Loading ...
Loading ...
Daily wash
A program suitable for day-to-day dishwashing. This program
can also clean dried leftovers, but is not intended for burnt food,
such as on oven dishes.
Heavy wash
Program for very dirty dishes, such as pans, casserole dishes
and oven dishes. If these dishes do not completely fill the dish-
washer, you can add plates and the like.
Normal program
Use to wash normally dirty dishes, such as plates, serving dishes,
cups, glasses and so on.
For washing normally soiled mixed loads, with the best energy
and water performance, use the Normal program; low tempera-
ture, short drying (no options).
If you want to improve the dishwashing and drying result activate
the options high temperature and long drying . This
causes a slight increase in energy consumption.
Eco wash
Use when you want to save water. For normally dirty dishes.
Quick wash
This program is used for glasses and porcelain that is slightly
dirty, such as coffee cups.
Rinse & Hold
Used to rinse dishes while you wait for the dishwasher to become
fully loaded.
Selecting Options
To select an option, press one of the option buttons. The field
next to the button lights when the option is activated. The available
options depend on the selected program. Once you have started
the program, the options you selected are saved for the next time
you use the same program. An exception is the Delayed start
option.
High temperature
Activate this option for improved dishwashing results. The ma-
chine then uses a higher temperature for the main wash.
If you want to use the lower temperature, press until the field next
to the button turns off.
You can vary the temperature as shown below:
60 °C / 70 °CHeavy wash:
48 °C / 65 °CNormal program:
60 °C / 65 °CDaily wash:
30 °C / 60 °CQuick wash:
53 °C / 60 °CEco wash:
Long dry
The higher temperature in the final rinse and longer drying im-
proves the drying result if you activate the Long dry option. This
causes a slight increase in energy consumption.
If you want a program with Short dry, press so that the field next
to the button turns off.
Delayed start
When you select Delayed start, the dishwasher will start 1–24
hours after you press the Start/Stop button.
1 Press the button once to activate Delayed start. Press the
button several times – or hold it in – to set the desired number
of hours.
2 Press Start/Stop and the dishwasher counts down 1 hour at
a time and starts after the selected delay.
Press and hold Start/Stop for five seconds if you want to cancel
the Delayed start option.
NOTE!
Remember to press the Start/Stop button to start the program.
Start the dishwasher
Press and hold Start/Stop until the display flashes three times
with the remaining time. This indicates that the program has
started. Close the door properly, otherwise the dishwasher will
not start. The display indicates if the door is open.
NOTE!
If the machine does not start within 2 minutes of the last button
press, the display returns to showing the last program run.
Time remaining
Once you have selected a program and options, the display indi-
cates how long the program took the last time it was used. Once
you have started the dishwasher, the display indicates how much
program time remains. The remaining time is updated after the
water for the final rinse has been heated.
This may differ somewhat from time to time depending on the
temperature of the water supply, the amount of dishes, the ambi-
ent temperature and other factors.
While the program is running, the time counts down and the re-
maining program time is shown on the display. The remaining
time is shown, for example, as 1:15, which means the program
will run for another 1 hour and 15 minutes.
NOTE!
During the first run of each program, the remaining time dis-
played can be slightly misleading, as the dishwasher is estimat-
ing the time. When you run the program a second time, the
dishwasher will calculate the remaining time based on the
previous duration of the program.
7
Loading ...
Loading ...
Loading ...