Loading ...
Loading ...
Loading ...
en Customer service
16
4Customer service
Cu s t o mer ser vi ce
When calling us, please quote the product number
(E no.) and the production number (FD no.) so that we
can provide you with the correct advice. These numbers
can be found on the rating plate on the top of the
appliance.
You can make a note of the numbers of your appliance
and the telephone number of the after-sales service in
the space below to save time should it be required.
Please be aware that a visit by an after-sales engineer
will be charged if a problem turns out to be the result of
operator error, even during the warranty period.
Please find the contact data of all countries in the
enclosed customer service list.
To book an engineer visit and product advice
Rely on the professionalism of the manufacturer. You
can therefore be sure that the repair is carried out by
trained service technicians who carry original spare
parts for your appliances.
Accessories
(not included in the scope of delivery)
Note: These instructions apply to several appliance
models. It may be the case that an optional accessory
that is listed does not apply for your appliance.
Note: Observe the installation instructions in the
accessory.
--------
E no. FD no.
After-sales serviceO
GB 0344 892 8989
Calls charged at local or mobile rate.
IE 01450 2655
0.03 € per minute at peak.
Off peak 0.0088 € per minute.
=1U)'(1U
7\SH
Accessories Order number
Starter set for air-recirculation mode (flat hood
with chimney)
Easy-change filter for starter set
Z51AFU0X0
Z51AFA0X0
Starter set for air-recirculation mode (flat hood
without chimney)
Easy-change filter for starter set
Z51AFT0X0
Z51AFA0X0
Starter set for air-recirculation mode (angled hood
with chimney)
Easy-change filter for starter set
Z51AIU0X0
Z51AIA0X0
Starter set for air-recirculation mode (angled hood
without chimney)
Easy-change filter for starter set
Z51AIT0X0
Z51AIA0X0
Starter set for air-recirculation mode with filter
that can be regenerated (flat hood with chimney)
Z51AFS0X0
Starter set for air-recirculation mode with filter
that can be regenerated (angled hood with chim-
ney)
Z51AIS0X0
Starter set for air-recirculation mode with filter
that can be regenerated (flat hood without chim-
ney)
Z51AFR0X0
Starter set for air-recirculation mode with filter
that can be regenerated (angled hood without
chimney)
Z51AIR0X0
CleanAir air-recirculation module
Easy-change filter for CleanAir air-recirculation
module (cannot be regenerated)
Z51AXC1N6
Z53XXB1X6
Easy-change filter for CleanAir air-recirculation
module (can be regenerated)
Z50XXP0X0
Loading ...
Loading ...
Loading ...