D95FMW1N0B User Manual

Loading ...

en Operating the appliance

Automatic mode

Switching on

1. Touch the # symbol.

The fan will start at setting ƒ.

2. Touch the ‘ symbol.

The optimum fan setting is set using an automatic air

sensor.

Switching off

Touch the ‘ or # symbol to switch off automatic mode.

The fan will switch itself off automatically if the

automatic air sensor detects no further change in the air

quality in the room.

Automatic mode can run for a maximum of 4 hours.

Sensor control

In automatic mode, an automatic air sensor in the

extractor hood detects the intensity of the cooking and

roasting odours. Depending on the setting of the

automatic air sensor, the fan automatically switches

itself to another fan setting.

Possible sensor settings:

Default sensitivity setting: †

Lowest sensitivity setting: ‹

Highest sensitivity setting: Š

If the sensor controller responds too strongly or not

enough, it can be changed accordingly:

1. Touch and hold the ‘ symbol for 1 second when the

fan is switched on. The setting will be displayed.

2. The sensor controller setting can be changed by

touching the @ or A symbol.

3. Take your finger off the ‘ symbol.

AmbientLight

The AmbientLight can be switched on and off

independently of the fan.

Touch the k symbol.

Setting the brightness

Press and hold the k symbol until the required

brightness is reached.

Setting the colour

1. Switch off the fan.

2. Touch the k symbol.

The @ and A symbols will be lit for approximately

10 seconds.

3. Within this 10-second period, touch the A or

@ symbol until the colour you require is selected.

Note: Colour temperature settings are available in the

Home Connect app provided the appliance has this

function.

Lighting

The lighting can be switched on and off independently

of the fan.

Touch the 6 symbol.

Setting the brightness

Press and hold the 6 symbol until the required

brightness is reached.

Saturation display

If the metal grease filters or activated charcoal filter are/

is saturated, the corresponding symbols will flash once

the appliance has been switched off:

■ Metal grease filter: ”ªª

■ Activated charcoal filter: ’ªª

■ Metal grease filter and activated charcoal filter:

”ªª and ’ªª

If you have not yet done so, the metal grease filters

should now be cleaned or the activated charcoal filter

replaced. ~ "Cleaning and maintenance" on page 14

The saturation indicators can be reset while they are

flashing. To do this, touch the A symbol.

Switching over the display for air recirculation mode

For air recirculation mode, the electronic controller must

be switched over accordingly:

■ The extractor hood must be connected and switched

on.

■ Touch and hold the Q symbol and touch the @ or

A symbol until "2" lights up for air recirculation mode

(filters that cannot be regenerated). Take your finger

off the Q symbol. This will switch the electronic

controller over to air recirculation mode

(filters that cannot be regenerated).

■ Touch and hold the Q symbol and touch the @ or

A symbol until "3" lights up for air recirculation mode

(filters that can be regenerated). Take your finger off

the Q symbol. This will switch the electronic

controller over to air recirculation mode (filters that

can be regenerated).

■ Repeatedly touching and holding the Q symbol and

touching the @ or A symbol until "1" lights up

switches the electronic controller back over to air

extraction mode.

Audible signal

Switching on

Touch and hold the # and Q symbols at the same

time for approximately 3 seconds when the fan is

switched on. An audible signal will sound as an

acknowledgement.

When the signal tone is activated, ‚ will be lit.