Loading ...
Loading ...
Loading ...
16
INSTALLATION INSTRUCTIONS
!1
Attach double sided foam to the back of the water
filter head as shown in Diagram5. Write the date to
be replaced on the filter (date installed +6months).
Remove the double sided foam backing and attach the
filter to the desired position, reinforcing the filter with
the screws provided as located in step10 (refer to the
previous page).
!2
Run the 6mm (1/4”) tubing to the back of the
refrigerator ensuring there is enough tubing to pull the
refrigerator out for service.
!3
Using the measurement guide shown in Diagram 6,
mark out 16mm, on the end of the tubing as shown in
Diagram7.
!4
Insert the tubing marked 16mm into the water (solenoid) valve up to the marked line as
shown in Diagram8.
!5
Pull gently on tubing to ensure it is locked in as shown in Diagram9.
!6
The completed installation should look like Diagram6.
!7
Turn the isolating faucet on and check that all connections are dry and free of drips.
!8
Coil water line tubing behind the refrigerator. Pushyour refrigerator into place being
careful notto kink or squash the water line tube running into the water (solenoid) valve.
!9
Read pages 17–18 carefully and then turn refrigeratoron.
Diagram 5
Double sided foam
attachment
Diagram 6
Diagram 8
Diagram 9Diagram 7
Completed installation
Loading ...
Loading ...
Loading ...