2004 TOWN CAR Owners Guide

Loading ...

4. Press the RESET button to

de-calibrate the compass. The

display will read CIRCLE SLOWLY

TO CALIBRATE for a few seconds

and then display a direction with

CAL displayed on the right side.

5. Slowly drive the vehicle in a

circle (less than 5 km/h [3 mph]).

This will take up to three circles to complete calibration.

6. The correct compass heading will be displayed when the compass is

calibrated.

Note: If the RESET button is not pressed, the compass will exit

calibration mode after three minutes of no activity and the original

calibration data will be restored.

Note: If power is interrupted during the calibration process, the compass

resets to the original calibration data from before the calibration process

started.

HomeLink姞 mode (if equipped)

Train mode

Note: Do not train the HomeLink威 with the vehicle parked in the garage.

To train a HomeLink威 button to control a specific device:

1. Select the HomeLink威 button to

train.

2. Press and continuously hold the

button for 20 seconds. CHANNEL X

TRANSMIT will be displayed (X will

be 1, 2, or 3) during this time.

Note: If more than one button is

pressed, priority will be given to the

lowest numbered channel.

2004 Town Car (tow)

Owners Guide (post-2002-fmt)

USA English (fus)

Driver Controls

Loading ...

Owners Guide - Page 91