Loading ...
Loading ...
Loading ...
9
Flexible zone
This may be used as one complete hotplate or two individual
hotplates depending on the actual cooking needs.
Advice on using cookware
To ensure that the cookware is detected and heat is distributed
evenly, correctly centre the cookware:
Warnings
When using cookware of a different size or made of a different
material, noise and vibrations that do not affect the correct
working of the zone may occur.
Consisting of two independent zones
The flexible zone can be used normally as two independent
hotplates.
How to activate
See “adjusting the hotplate“ section.
As one hotplate
To use the entire hotplate with all individual zones.
How to activate
1. Place the cookware and select the desired power level with
one of the two controls in the flexible zone.
The power level lights up on the hotplate indicator that has
been activated with the control.
2. Press the å symbol. The indicator lights up.
The flexible zone has been activated.
Changing the power level
Use the same control as above to change the power level.
Adding more cookware
Place the new cookware and press the
å symbol. The new pan
will be detected and the previously selected power level will be
maintained.
Notes
■ If you place new cookware and do not press the å symbol,
the new cookware will not be detected.
■ If the pan on the hotplate that is switched on is moved or
removed, the hob will perform an automatic search and the
previously selected power level will be maintained.
How to deactivate
Turn the control to the 0 setting.
The flexible hotplate has been deactivated.
Note: If you turn the control which has not been used to select
the power level, the flexible zone is deactivated. In this case,
the two hotplates are locked with the
‹ symbol flickering on the
power level indicators until the two controls return to the 0
setting.
Return to using two hotplates
Turn the control to the 0 setting. The flexible zone can be used
once again as two independent hotplates.
Note: When a hob is switched off and later switched on again,
the flexible zone will again be used as two hotplates.
As one hotplate
Diameter less than or equal to 13 cm
Place the cookware on one of the four posi-
tions shown in the image.
Diameter greater than 13 cm
Place the cookware on one of the three
positions shown in the image.
If the cookware takes up more than one hot-
plate, place it at the top or bottom edge of
the flexible zone.
As two independent hotplates
The front and back hotplates, each with two
inductors, can be used independently by
selecting the necessary power for each
one. In this case, it is recommended to only
use one pan on each hotplate.
To obtain maximum power with the
Powerboost Function, place the
cookware in the centre of the flexi-
ble zone when used as a single hot-
plate.
On hobs with more than one flexible
zone, it is not recommended to use
several zones at the same time for a
single pan.
Loading ...
Loading ...
Loading ...