Loading ...
Loading ...
Loading ...
11
Time programming function
This function may be used in two different ways:
■ to automatically switch off a hotplate.
■ as a timer.
Turning off a hotplate automatically
The hotplate turns off automatically once the selected time has
elapsed.
Program the cooking time.
The hob must be switched on:
1. Select the power level on the desired hotplate.
2. Press the 0 symbol. The Ú indicator on the hotplate lights
up.
‹‹ is displayed on the time program function display.
3. Press the + or - symbol. The basic setting appears:
+ symbol: 30 minutes.
- symbol: 10 minutes.
4. Press the + or - symbol until the desired cooking time
appears.
After a few seconds, the cooking time begins to elapse.
Note: The same cooking time can be automatically
programmed for the all the hotplates. The programmed time
passes independently for each of the hotplates.
The Basic settings chapter provides information on
automatically programming the cooking time.
Changing or cancelling the time
Press the
0 symbol several times until the Ú indicator of the
required hotplate lights up. Change the cooking time using
the + or - symbols, or set to
‹‹.
Once the time has elapsed
The hotplate switches off. A beep sounds and in the time
program function display
‹‹ appears for 10 seconds.
The
Ú indicator on the hotplate lights up. Pressing the 0
symbol turns off the indicators and stops the beeping.
Notes
■ If a cooking time has been programmed for various zones,
the time program function display always shows the time of
the last hotplate whose power or setting has been adjusted.
■ Cooking times can be programmed for up to 99 minutes.
The timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
How to program
1. The timer can be selected in two different ways:
■ If you have selected the hotplate: press the 0 symbol
twice.
■ If you have not selected the hotplate: press the 0 symbol.
The
Ú indicator next to the U symbol lights up. ‹‹ is
displayed on the time program function display.
2. Press the + or - symbol. The basic setting appears.
+ symbol: 10 minutes.
- symbol: 5 minutes.
3. Set the desired time using the + or - symbols.
After a few seconds, the time will start to elapse.
Changing or cancelling the time
Press the
0 symbol various times until the Ú indicator next to
the
U symbol lights up. Change the time or set to ‹‹ with
the + or - symbols.
Once the time has elapsed
A warning signal sounds.
‹‹ is displayed on the time program
function display. After 10 seconds the indicators turn off.
Pressing the
0 symbol turns off the indicators and stops the
beeping.
Automatic time limitation
If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. The
”, ‰ symbol and the residual
heat indicator
•/œ flash alternatively in the display.
When the control is turned to setting 0, the indicator goes off.
The hotplate can now be reset.
When the automatic time function is used, it is governed by the
selected power level (from 1 to 10 hours).
Loading ...
Loading ...
Loading ...