Loading ...
Loading ...
Loading ...
253If and when
Luggage compartment light
Fig. 180 Luggage com-
partment light
Fig. 181 Luggage com-
partment light
– Extract the tulip shaped fitting by pressing on the inside edge
of this -arrow- using the flat side of a screwdriver
⇒
Fig. 180.
– Press the bulb sideways and remove it from its housing
⇒ Fig. 181.
Jump-starting
Jump leads
The jump lead must have a sufficient wire cross section.
If the engine fails to start because of a discharged battery, the battery can
be connected to the battery of another vehicle to start the engine.
Jump leads
Jump leads must comply with standard DIN 72553 (see cable manufactur-
er's instructions). The wire cross section must be at least 25 mm
2
for petrol
engines and at least 35 mm
2
for diesel engines.
Note
● The vehicles must not touch each other, otherwise electricity could flow
as soon as the positive terminals are connected.
● The discharged battery must be properly connected to the on-board net-
work.
Safety First Operating instructions Practical Tips Technical Specifications
Loading ...
Loading ...
Loading ...