Loading ...
Loading ...
Loading ...
243If and when
– Raise the bonnet.
– Move the loop
1
in the direction of the arrow and remove the
cover ⇒ Fig. 160.
– Remove connector ⇒ Fig. 161
2
by pulling outward.
– Remove the bulb by pulling it out and fitting the new one.
– Installation involves all of the above steps in reverse sequence.
– Fit the cover and close the strap. Make sure that the gasket sits
well on the casing cover during the operation.
– Check whether the new bulb is working.
Main beam headlights
Fig. 162 Main beam
headlights
Fig. 163 Main beam
headlights
– Raise the bonnet.
– Move the loop
1
in the direction of the arrow and remove the
cover ⇒ Fig. 162.
– Remove connector ⇒ Fig. 163
2
by pulling outward.
– Extract the bulb and fit the replacement so that it sits correctly
into the cut-out on the reflector.
– Installation involves all of the above steps in reverse sequence.
– Fit the cover and close the strap. Make sure that the gasket sits
well on the casing cover during the operation.
– Check whether the new bulb is working.
Safety First Operating instructions Practical Tips Technical Specifications
Loading ...
Loading ...
Loading ...