Loading ...
Loading ...
Loading ...
English 31
Operations
Operations
Control panel
01
02
03
04 05
06
07
09
08
11
10
01 Cycle Selector Turn the dial to select a cycle.
02 Display
The display shows current cycle information and estimated time
remaining, or an information code when a problem occurs.
For buttons and icons, refer to the corresponding page..
03
Temp.
Press to change the water temperature for the current cycle.
04
Rinse
Press to change the rinse count for the current cycle. You can set the
rinse count to a max of 5, depending on the cycle.
05
Spin
Press to change the spinning speed for the current cycle. The
revolutions per minute (RPM) differs with the model.
• Rinse Hold(No indicator): The nal rinse process is suspended
so that the laundry remains in the water. To unload the laundry,
run a drain or spin process.
- To use the Rinse Hold option, press Spin repeatedly until all
rpm numeric indicators turn off. Not available for the DRAIN/
SPIN cycle.
• No Spin
: The drum does not spin after the nal drain process.
• Spin Only: To run the Spin Only cycle, press Spin for 3 seconds.
When the cycle time and spinning speed appear, press Spin
repeatedly until a desired spinning speed is selected. Then,
press and hold Start/Pause to start the cycle. The spinning time
depends on the selected cycle.
06 Options
Press to select an option from Intensive and Pre Wash. Press again to
deselect.
WW95N54F5CW_DC68-03974Q_EN.indd 31 2020/3/17 11:01:45
Loading ...
Loading ...
Loading ...