Summit LX114LPT1 BeautiFridge Cosmetics Refrigerator

User Manual - Page 8

For LX114LPT1.

PDF File Manual, 12 pages, Read Online | Download pdf file

LX114LPT1 photo
Loading ...
Loading ...
Loading ...
8
OPERATING YOUR REFRIGERATOR
This equipment is intended for the storage and display of non-potentially-hazardous bottled or
canned products only. The temperature is specifically set for the proper storage of cosmetics,
including creams, serums, and oils. Always read the labeling on your beauty products for specific
details on proper storage. Here are some general guidelines for storing these items:
Cosmetic
Recommended Temperature
Oils
54° - 60°F
Eye Creams and Serums
50° - 60°F
Face Masks and Creams
45° - 60°F
Pencils (Eyeliner)
Refrigerate for a few minutes prior to using them for better application
texture
Lipstick
Store between 65° - 75°F; refrigerate lipstick not being currently used
or used infrequently
Liquid Makeup
50° - 60°
Organic Cosmetics
50° - 60°
NOTE: Do not put too many items into the cooler at one time. Leave some space around the goods
to allow cold air to circulate inside the cabinet. Keep bottled articles away from the walls of
the interior to avoid freezing.
Temperature Adjustment
The BeautiFridge™ includes a digital thermostat with a temperature range of 42 to 65ºF. To adjust
the temperature between those points, follow the instructions below:
To see the SET POINT
The default display for your digital thermostat is the internal cabinet temperature. To view the unit’s
set point, push and immediately release the SET key. The display will flash, showing the set point
value. If no other actions are taken in 6 seconds, the display will revert to the internal air
temperature.
To change the SET POINT
While the set point value is blinking, press the UP or DOWN arrow to change the set point to your
desired temperature. Press the SET button again to exit the adjustment. The display will revert to the
internal air temperature.
Defrosting
This appliance defrosts automatically during its operating cycle. The water resulting from the
defrosting is collected in a drip tray near the compressor at the back where it is automatically
evaporated.
Do not use mechanical devices or other means to accelerate the defrosting process, other
than those recommended by the manufacturer.
Loading ...
Loading ...
Loading ...