Loading ...
Loading ...
3
IMPORTANT SAFEGUARDS
Your safety and the safety of others are very important.
• Read all instructions before using the BeautiFridge™.
• Plug into a grounded 3-prong outlet. Do not remove grounding prong, do not use an adapter,
and do not use an extension cord.
• It is recommended that a separate circuit, serving only your BeautiFridge™, be provided. Use
receptacles that cannot be turned off by a switch or pull chain.
• Never clean BeautiFridge™ parts with flammable fluids. Fumes can create a fire hazard or
explosion.
• Do not store or use gasoline or any flammable vapors and liquids in the vicinity of this or any other
appliance. The fumes can create a fire hazard or explosion.
• Do not connect or disconnect the electric plug when your hands are wet.
• Unplug the BeautiFridge™ or disconnect the power before cleaning or servicing. Failure to do
so can result in electrical shock or death.
• Do not attempt to repair or replace any part of your appliance unless it is specifically
recommended in this manual. All other servicing should be performed by a qualified technician.
• Use two or more people to move and install the BeautiFridge™. Failure to do so can result in
back or other injury.
• To ensure proper ventilation for your appliance, the front of the unit must be completely
unobstructed. Choose a well-ventilated area with temperatures above 61
°
F (16
°
C) and below
95
°
F (35
°
C). [The unit performs best when the ambient temperature is in the range 66 – 75°F
(19º – 24ºC).] This unit must be installed in an area protected from the elements, such as wind,
rain, water spray or drips.
• The BeautiFridge™ should not be located next to ovens, grills or other sources of high heat.
• For optimum energy conservation, locate the BeautiFridge™ in the coolest area of the room, away
from heat-producing appliances and out of direct sunlight.
• The BeautiFridge™ must be installed with all electrical connections in accordance with state and
local codes. A standard electrical supply (115V AC only, 60 Hz), properly grounded in
accordance with the National Electrical Code and local codes and ordinances, is required.
• Do not kink or pinch the power supply cord.
• If the power supply cord is damaged, it must be replaced by a special cord or assembly available
from the manufacturer or the service agent.
• The fuse (or circuit breaker) size should be 15 amps.
• It is important for the BeautiFridge™ to be leveled in order to work properly. You may need to
make several adjustments to level it.
• Although the unit has been tested at the factory, due to transit and storage, you should clean the
appliance before use.
• Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners may
damage or discolor the interior.
• Do not use this apparatus for other than residential purposes.
WARNING
Follow these basic precautions to reduce the risk of fire, electrical shock, or injury when using
your appliance.
Loading ...
Loading ...
Loading ...