Loading ...
Loading ...
Loading ...
EN - 10 -
Warnings about Temperature Adjustments
• Your temperature adjustments will not be deleted when an energy breakdown occurs.
• It is not recommended that you operate your fridge in environments colder than 10°C
in terms of its efficiency.
• Temperature adjustments should be made according to the frequency of door
openings, the quantity of food kept inside the fridge and ambient temperature of the
place of your fridge.
• When you first switch on the appliance, you should ideally try to run it without any food
in for 24 hours and not open the door. If you need to use it straight away, try not to put
a large quantity of food inside.
• A 5 minute delay function is included to prevent damage to the compressor of your
fridge, when you unplug it and then plug it in again to operate it, or when an energy
breakdown occurs. Your fridge will start to operate normally after 5 minutes.
• Your fridge is designed to operate in the ambient temperature intervals stated in the
standards, according to the climate class stated in the information label. It is not
recommended that your fridge is operated in the
environments which are out of the stated
temperature intervals. This will reduce the cooling
efficiency of the fridge.
• This equipment is designed for use at an ambient
tem-perature within the 16°C - 43°C range.
Note:
• If ambient temperature is less than 25°C, the refrigerator setting should be adjusted
to between positions 1 and 3.
• If ambient temperature greater than 25°C, the refrigerator setting should be increased
until the temperature provides sufficient cooling.
• The optimum setting for the fridge is -18°C or -20°C.
• In summer, if refrigerator is used where the ambient temperature is high, you should
adjust the freezer thermostat to to -24°C.
Climate Class Ambient
T
16 to 43 °C
ST
16 to 38 °C
N
16 to 32 °C
SN
10 to 32 °C
Freezer compartment temperature settings
• The initial temperature of the Setting Display is -18°C.
• Press the freezer setting button once.
• When you press the button for the first time, the last value set will blink on the display.
• Each time you press the button, the temperature setting will decrease (-16°C, -18°C,
-20°C, -22°C, -24°C, Super Freezing).
• If you press freezer setting button until the super freezer symbol is displayed on the
Freezer Settings Display and do not press any button within the 3 seconds, Super
Freezing will blink.
• If you keep on pressing, it will restart from -16°C.
Loading ...
Loading ...
Loading ...