Loading ...
Loading ...
Loading ...
,
Do not submerge the vacuum in
water. If moisture gets into the
appliance there is the risk of an
electric shock.
Frequently asked questions
,
Turn off and unplug the vacuum
cleaner before performing any
maintenance work.
What if the vacuum turns off
automatically?
The vacuum has overheated. The
temperature limiter automatically turns
the vacuum off.
This can occur if, for instance, large
articles block the suction tube or when
the filter bag is full or contains particles
of fine dust. A heavily soiled exhaust or
dust compartment filter can also be the
cause of overheating. Turn the vacuum
off s and pull the plug from the outlet.
Check for any blockages and allow the
vacuum to cool for 30 minutes.
After sales service
In the event of a fault which you cannot
fix yourself please contact the Miele
Service Department at the phone
number listed on the back of this
booklet.
^
Please quote the model type of your
appliance.
This can be found on the data plate on
the bottom of the vacuum.
Optional accessories
Observe the cleaning instructions of
the floor manufacturer.
Many of these accessories as well as
other products can be purchased from
the Miele Store at www.Mieleusa.com.
Some models come standard with one
or more of the following accessories.
Powerbrushes
To connect a Powerbrush you also
need :
– Electro telescopic wand SET 220
– Electro suction hose SES 117.
Powerbrush SEB 217-3 (EB02)
The Powerbrush is particularly suitable
for cleaning and restoring crushed
carpet pile of wall to wall carpeting and
floor coverings subject to hard wear,
especially in high traffic areas.
Powerbrush SEB 228 (EB03)
This Powerbrush is similar to the
SEB 217-3 with the addition of a height
adjustable brush, allowing it to also be
used on smooth floor surfaces.
Powerbrush SEB 236 (EB01)
This Powerbrush is similar to the
SEB 228 except it also includes a
headlight and multifunction indicator.
en
18
Loading ...
Loading ...
Loading ...