Loading ...
Loading ...
Loading ...
The illustrations referred to in the text
are shown on the fold-out pages at the
end of these operating instructions.
Before using the vacuum
cleaner
Attaching the suction hose (see fig. 1)
^
Insert the elbow into the suction
socket until it clicks. Use the inlet
guides to direct insertion.
Removing the suction hose (see fig. 2)
^ Press the release buttons at the sides
of the elbow and lift the hose from the
socket.
Connecting the handle to the suction
hose (see fig. 3)
^ Insert the suction hose into the
handle until it clicks into position.
Connecting the handpiece and
telescopic wand (see fig 4)
^
Insert the handpiece into the
telescopic wand. Use inlet guides to
direct insertion.
^
To release the handpiece from the
telescopic wand press the locking
button (see arrow) and pull the
handpiece away from the telescopic
wand with a slight twist.
Adjusting the telescopic wand
(see fig. 5)
The telescopic wand consists of two
sections which are height-adjustable.
^
Press the adjustment button to
release the tubes and adjust to the
desired height.
Attaching the standard floor brush
(see fig 6)
(depending on model)
^
Insert the wand into the floor brush
and twist until it locks with a click.
To release the floor brush from the
telescopic wand, press the locking
button (see arrow) and pull the wand
out of the floor brush.
Floor brush settings (see fig. 7,8+9)
Observe the cleaning instructions of
the floor manufacturer.
To clean carpets and area rugs:
^ Press the foot switch %.
To clean hard flooring:
^ Press the foot switch ).
Floors with very deep joints and
cracks should be vacuumed using
the floor brush with the bristles out.
AirTeQ Combination Floor Tool
(see fig. 9)
This floor tool has been specially
developed to achieve excellent
cleaning results using low energy. It
has particularly low power consumption
and high suction capability.
Warning: If the suction power of the
AirTeQ Combination Floor Tool
seems too high, reduce the suction
until the tool is easier to move
across the floor (see "Correct use -
adjusting the suction power").
en
10
Loading ...
Loading ...
Loading ...