Loading ...
Loading ...
Loading ...
Problem Possible cause Remedy
comes on.
There is a fault. To reset the fault, deactivate
and activate the hob, after
light animation, when re-
appears, touch and then
within 3 seconds.
When you see the fault is
reset.
Make sure that the crown
and the flame cap are cor-
rectly positioned, and clean
the metal part of the flame
safety device.
You can hear a constant
beep noise.
The electrical connection is
incorrect.
Disconnect the hob from the
electrical supply. Ask a quali-
fied electrician to check the
installation.
comes on.
The hob is too hot. Wait a few minutes for cool
down the hob. If possible,
put the large cookware on
the rear burners.
comes on.
There is a fault. Follow the same procedure
as if appeared.
comes on.
Too many attempts to clear. Wait for 15 minutes and fol-
low the same procedure as if
appeared.
and the number come
on.
There is an error in the hob. Disconnect the hob from the
electrical supply for some
time. Disconnect the fuse
from the electrical system of
the house. Connect it again.
If comes on again, speak
to an Authorised Service
Centre.
comes on.
There is a dirt around burner
area.
Refer to "Care and clean-
ing".
8.2 If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Make sure,
you operated the hob correctly. If not the
servicing by a service technician or
dealer will not be free of charge, also
during the warranty period. The
instructions about the Service Centre and
conditions of guarantee are in the
guarantee booklet.
ENGLISH 23
Loading ...
Loading ...
Loading ...