Loading ...
Loading ...
Loading ...
Remove the dipstick again, and
check the level. It should be
between the upper and lower
marks.
Wait a few minutes after turning the
engine off before you check the oil.
Insert it all the way back in its tube.
If it is near or below the lower mark,
see on page .
Pull the support rod out of its clip
and insert the end into the
designated hole in the hood.
To close the hood, lift it up slightly
to remove the support rod from
the hole. Put the support rod back
into its holding clip. Lower the
hood to about a foot (30 cm) above
the fender, then let it drop. Make
sure it is securely latched.
Remove the dipstick (orange loop).
Wipe off the dipstick with a clean
cloth or paper towel.
3.
1.
2.
4.3.
159
Oil Check
Adding Engine Oil
Service Station Procedures
Before Driving
125
SUPPORT ROD
CLIP
UPPER MARK
LOWER MARK
DIPSTICK
Main Menu
Table of Contents
Loading ...
Loading ...
Loading ...