Loading ...
Loading ...
Loading ...
English 35
Installation
To install the ice maker kit
WARNING
To prevent electrical shock, make sure the refrigerator is turned off before installation.
1. See the gure on the left, and then
locate the cover on the inner upper
corner of the main unit.
2. Remove the screws (x2) from the cover,
and then remove the cover by pulling it
to the front.
3. Connect the wire connector of the ice
maker to the socket (marked in the
gure) on the main unit. Make sure the
connector is fully inserted to prevent
system failure.
4. Put the ice maker onto the specied
area of the main unit. Make sure both
the front and rear sides of the ice maker
are secure to prevent deviation of the
ice maker.
Untitled-8 35 6/23/2017 2:33:19 PM
Loading ...
Loading ...
Loading ...