Loading ...
Loading ...
Loading ...
Pre-operation checks
65
Securely install the stern drain plugs by tight-
ening them until they stop.
EJU41441
Hood check
Push down on the rear of the hood and make
sure that it is securely closed.
EJU40145
Post-launch checks
Perform the post-launch checks in the pre-
operation checklist while the watercraft is in
the water and the engine is running.
To perform the post-launch checks:
(1) Launch the watercraft. (See page 68 for
information on launching the watercraft.)
(2) Perform the checks and make sure that
there are no malfunctioning items or oth-
er problems.
EJU40553
Cooling water pilot outlet check
Make sure that water is discharged from the
cooling water pilot outlet while the engine is
running. (See page 35 for information on the
cooling water pilot outlet.)
EJU32715
Multifunction information center check
Make sure that the multifunction information
center operates properly. (See page 40 for in-
formation on proper operation of the multi-
function information center.)
EJU40172
Engine idling speed check
Start the engine and warm it up. Use the ta-
chometer in the multifunction information
center to make sure that the engine idling
1 Stern drain plug
1
UF2P11E0.book Page 65 Monday, July 8, 2013 2:41 PM
Loading ...
Loading ...
Loading ...