Loading ...
Loading ...
Loading ...
Control function operation
33
TY” indicator light blinks two or three times,
then comes on. This indicates the unlock
mode is selected.
EJU31153
Engine stop switch “ ”
The engine stop switch (red button) stops the
engine when the switch is pushed.
EJU31164
Engine shut-off switch “ ”
The engine shut-off switch automatically
stops the engine when the clip, on the end of
the engine shut-off cord (lanyard), is removed
from the switch, such as if the operator falls
off the watercraft.
Insert the clip under the engine shut-off
switch before starting the engine.
When the engine is not running, remove the
clip from the engine shut-off switch to pre-
vent accidental starting or unauthorized op-
eration by children or others.
EJU41651
Start switch “ ”
NOTICE
ECJ01311
Do not run the engine over 4000 r/min on
land. Also, do not run the engine for more
than 15 seconds without supplying water,
otherwise the engine could overheat.
The start switch (green button) starts the en-
gine when the switch is pushed.
Release the start switch as soon as the en-
gine starts to run. If the engine does not start
1 “L-Mode” (unlock) button
2 “SECURITY” indicator light
1 Engine stop switch
2
L-Mode
1
1
1 Engine shut-off switch
2 Clip
3 Engine shut-off cord (lanyard)
STOP
3
1
2
UF2P11E0.book Page 33 Monday, July 8, 2013 2:41 PM
Loading ...
Loading ...
Loading ...