Loading ...
Loading ...
Loading ...
en Appliance door
24
qAppliance door
Ap p l i a n c e door
With good care and cleaning, your appliance will retain
its appearance and remain fully functional for a long
time to come. This will tell you how to remove the
appliance door and clean it.
Removing and fitting the appliance door
To clean the door panels, you can detach the appliance
door.
:Warning – Risk of injury!
The hinges of the appliance door may snap shut with
great force. Always fully turn the two locks for fitting and
removing the appliance door.
:Warning – Risk of injury!
If the appliance door has been removed without turning
both locking levers to their limit stops, the hinge may
snap shut. Do not reach into the hinge. Call the after
sales service.
Detaching the appliance door
1. Open the left- and right-hand door locks (fig. !).
To do this, hold the screwdriver horizontally and use
it to push the door lock (black component) on each
side of the door all the way up (fig. ").
Tip: Use a torch to light up the gap so that you can
see the door locks.
Door lock closed (fig. #)
Door lock open (fig. $)
2. Open the appliance door approx. 45° (fig. %).
3. Using a coin, turn both the left- and right-hand locks
on the inside of the appliance at the bottom as far as
they will go.
Left-hand lock: Clockwise
Right-hand lock: Anti-clockwise
The arrows will now be pointing to one another and
the lock will click into place (fig. &).
Left-hand lock secured (fig. ')
Right-hand lock released (fig. ()
4. Move the appliance
door back and forth until you hear a quiet click
(fig. )).
The appliance door is now in the lock position.You
will only be able to move it slightly.
Caution!
Risk of damaging the door hinges. Do not force the
appliance door open or closed when it is in the lock
position.
If you have forced the appliance door open or
closed when it was in the lock position, please
contact our after-sales service.
2
1I
I
I
Loading ...
Loading ...
Loading ...