Loading ...
Loading ...
Loading ...
SIMPLINK Setup
• When the SIMPLINK Setup is set to On, you can use the SIMPLINK provided by LG Signage.
• Device ID: S ets the ID of the device connected via CEC wiring. You can choose a value between 'All' and 'E'.
• StandBy: Sets the scenarios for sending and receiving the OpStandBy (0x0c) command. Detailed scenarios are as
follows:
Send Receive
Send Only O X
Receive Only X O
All O O
Multi-screen Resolution
• This feature allows you to change the recommended resolution for the connected device according to the selected
split screen mode in Multi-screen. You can set the recommended resolution to change automatically or be fixed at the
recommended resolution according to a specific split screen mode. The screen may flicker when changing settings.
• Fit to Screen: The recommended resolution for the connected device automatically changes to the optimal resolution
for the selected split screen mode in Multi-screen. If you select a resolution other than the recommended resolution
for the connected device, the selected resolution remains fixed, even when the split screen mode is changed.
• On some graphics cards capable of both HDTV signal output and PC signal output, the HDTV output resolution is
adjusted to 1080p or lower, and the PC output resolution is adjusted for two, three, or four screens automatically.
• For some graphics cards and operating systems, it may be necessary to set the recommended resolution for each split
mode.
• One Screen: The recommended resolution for the connected device is set to the optimal resolution for a single screen.
When using Multi-screen, the screen may not work properly. To use the device in the Multi-screen environment,
the settings must be changed according to the selected mode. To run the multi-screen app, the resolution of the
connected device must be set to the supported resolution of the multi-screen mode or lower.
• Two Screens: The recommended resolution for the connected device is set to the optimal resolution for twoscreen
split screen mode in Multi-screen.
• Three Screens: The recommended resolution for the connected device is set to the optimal resolution for threescreen
split screen mode in Multi-screen.
• Four Screens: The recommended resolution for the connected device is set to the optimal resolution for fourscreen
split screen mode in Multi-screen.
ENGLISH
13
Loading ...
Loading ...
Loading ...