Loading ...
Loading ...
Loading ...
Third Seat Installation:
If you are not sure how to install the
tether, or you need mounting
hardware, contact your Honda dealer.
To attach the tether to the child seat,
follow the child seat maker’s
instructions.
If a torque wrench was not used, see
your Honda dealer as soon as
possible to verify proper installation.
When installing tether hardware,
make sure the toothed washer is on
the bottom of the bolt. Tighten the
bolt to:
Attach the tether strap hook to the
tether anchorage point as shown in
the illustration, then tighten the
strap according to the child seat
maker’s instructions. Make sure the
strap is not twisted.
There are three anchorage points on
the tailgate sill. The tether hardware
is installed on the center anchorage
point.
If you want to use either of the
outside anchorage points, remove
the tether hardware from the center
anchorage point, remove the plug
from the anchorage point you are
going to use with a small flat-tipped
screwdriver, then install the tether
hardware.
Protecting Children
Driver and Passenger Safety
47
16 lbf·ft (22 N·m , 2.2 kgf·m)
Main Menu
Table of Contents
Loading ...
Loading ...
Loading ...