Loading ...
Loading ...
Loading ...
CONTINUED
Put the socket back into the light
assembly and turn it clockwise to
lock it in place.
Remove the license light assembly
by carefully prying on the left
edge of the lens with a flat-tip
screwdriver and pulling the
assembly out.
Remove the lens from the bulb
holder by pulling the lens while
squeezing the tabs on both sides
of the holder.
Pull the bulb straight out of its
socket. Push the new bulb in until
it bottoms in the socket.
Put the light assembly back into
the tailgate. Install the screw and
tighten it securely. Reinstall the
lens segment.
Turn on the lights to make sure
the new bulb is working.
2.
3.
6.
7.
8.
1.
Lights
Maintenance
Replacing a Rear License Plate
Bulb
337
Main Menu
Table of Contents
Loading ...
Loading ...
Loading ...