Loading ...
Loading ...
Loading ...
9
14. To interrupt the brewing cycle at any time, press the button. Then remove the plug from the wall outlet.
15. At the end of the cycle, the Coffee Maker and all indicator lights will automatically turn OFF.
16. Allow unit to cool before removing the used capsule to discard.
17. Unplug the Coffee Maker when not in use.
SETTING UP YOUR DUALBREW SINGLE SERVE COFFEE MAKER USING THE GROUND
COFFEE ADAPTOR.
The ground coffee adaptor allows you to create your own favorite blend of coffee. Personalize your blends by
adding a dash of cinnamon, orange peel, cardamom or vanilla bean for avoring, to name a few options.
NOTE: For best results, use medium ground coffee.
WARNING: Before brewing, it is recommended the water tank be lled at least to the lowest 6-oz. step. To avoid
damage to your Coffee Maker, never operate your Single Serve Coffee Maker when the water tank is empty.
1. Lift the water tank lid located at the top back of the unit. (See Figure 1.)
2. Using the desired cup, mug, or tumbler as your measure, add water to the water tank. The water tank has
an easily visible, stepped water level indicator. Add water to the desired ll line to brew one cup of any
hot beverage. The level indicator marks 6-oz., 10-oz., and 15-oz. However, any amount of water may be
added. DO NOT EXCEED the 15-oz. MAX ll line.
3. Lower the lid.
IMPORTANT: For optimal avor, distilled water is preferred.
4. Position the cup under the nozzle and onto the center of the drip
tray cover.
5. Pull the adaptor compartment’s front tab up to unlock and lift
the lid.
6. Choose the ground coffee adaptor. Fill the reusable ground coffee
adaptor to the designated ll line, or to taste. DO NOT EXCEED
the MAX ll line. It is recommended to use one 1 tbsp of ground
coffee for every cup of water.
7. With the handle facing front, place the ground coffee adaptor
into the adaptor compartment. Slide the adaptor handle into the
grooves at the front of the Coffee Maker. (See Figure 6.)
8. Press the adaptor compartment’s lid down rmly. An audible click
can be heard as the lid is locked rmly into position.
9. Plug the Coffee Maker into a 120V AC electrical wall outlet.
10. Press the
button to begin the brew cycle.
11. The red PREHEAT indicator light will begin to ash as the Coffee
Maker begins heating the water.
12. When the water has reached the optimum temperature, the
preheat light will go out and the blue BREW light will illuminate.
13. The pump will then activate and coffee will begin to stream through the nozzle.
14. To interrupt the brewing cycle at any time, press the
button. Then remove the
plug from the wall outlet.
15. At the end of the cycle, the Coffee Maker and all indicator lights will automatically turn OFF.
16. Unplug the Coffee Maker when not in use.
BREW
PREHEAT
Figure 6
Ground Coffee
Loading ...
Loading ...
Loading ...