Loading ...
Loading ...
Loading ...
26
USING YOUR WASHING MACHINE
Setting options before the cycle
You can select and add desired optional functions
before you start the washing machine.
Adjusting melody and button tones, Signal
The washing machine plays a melody when the
wash cycle is finished. The buttons make a sound
each time a button is pressed. The volume of
these melody and button tones can be changed
or they can be turned off if desired.
1 Press the Power button.
2 Turn the cycle selector knob to the desired
cycle.
3 Press the Signal button to adjust the melody
and button tones as desired.
4 You can now modify the cycle settings and
add options (see pages 25-28), or proceed to
step 4 to begin the cycle.
5 Press the Start/Pause button.
Prewashing, Prewash
Prewash for 15 minutes when clothes are covered
in dirt or dust. This feature is suitable for heavily
soiled items.
1 Press the Power button and turn the cycle
selector knob to the desired cycle.
2 Press the Prewash button.
- The indicator light will turn on.
3 You can now modify the cycle settings and add
other options (see pages 25-28), or proceed to
step 4 to begin the cycle.
4 Press the Start/Pause button.
Rinse, drain and spin only, Rinse+Spin
Use this cycle to rinse detergent from the load.
1 Press the Power button and turn the cycle
selector knob to the desired cycle.
2 Press the Rinse + Spin button.
3 Press the Spin Speed button repeatedly to set
the spin speed.
-
The indicator light for the selected spin speed
will turn on.
4 Press the Start/Pause button.
Drum Lighting, Drum Light
The drum is equipped with a white LED light that
illuminates when the washer is turned on. This
light automatically turns off when the door is
closed and the cycle starts. To turn on the light
during a cycle follow the instructions below.
1 Press and hold the Extra Rinse/Drum Light
button for 3 seconds during the wash cycle.
- The drum light will illuminate and then turn
off automatically after 4 minutes.
- It is normal for clothes and the gasket to
appear yellow in the LED lighting.
Tumbling clothes to prevent wrinkles,
Fresh Care
Use this function when you are not able to
remove your clothes from ths washer as soon as
the wash cycle ends.
1 Press and hold the Steam/Fresh Care button
for 3 seconds before the wash cycle.
- The Fresh Care indicator light will turn on.
NOTE
y
This function provides periodic tumbling for
up to about 19 hours to prevent wrinkles. If
you press the Start/Pause or Power button,
you can unload your laundry at any time.
Adding an extra rinse cycle, Extra Rinse
You can add an extra rinse cycle to the default
rinse cycle.
1 Press the Power button and turn the cycle
selector knob to the desired cycle.
2 Press the Extra Rinse button.
- The Extra Rinse indicator light will turn on.
3 You can now modify the cycle settings and
add other options (see pages 25-28), or
proceed to step 4 to begin the cycle.
4 Press the Start/Pause button.
Loading ...
Loading ...
Loading ...