Loading ...
Loading ...
Loading ...
Plasmacluster
POWER ON/OFF Button
When you press the
POWER ON/OFF Button, a
short beep will sound and
operation will start in AUTO
Mode.
Unless unplug the power
cord, the operation starts
from the previous mode the
unit was operated in.
To stop, press the POWER
ON/OFF Button again.
A long beep will sound and
operation will stop.
Auto (Fan Speed) Button
The fan speed switches au-
tomatically depending on the
amount of impurities in the air.
Manual (Fan Speed) Button
The fan speed can be
switched among SILENT,
NORMAL and MAX settings.
15 min. HIGH Button
See page E-8
LIGHTS ON/OFF Button
Switches the Plasmacluster
Indicator Light and CLEAN-
SIGN Light either ON or OFF.
Transmitter
Filter Reset Button
When the Washable Active Car-
bon Filter is cleaned and
reinserted into the main unit,
press the Filter Reset Button.
Pollen Mode Operation
Button
See Page E-8
Off Timer Button
The set time switches every time
the button is pressed as shown
below.
The indicator light shows the
remaining time.
The unit will stop operation
when the timer is up.
1 hour
Cancel
4hours
8 hours
Plasmacluster Ion Mode Selections
AUTO
When pressed, the unit will switch between Clean
Mode and the Ion Control Mode automatically de-
pending on the amount of impurities in the air as
detected by the dust and odour sensors. Clean
Mode will operate for 1 minute when the Auto
function is selected.
(ION CONTROL)
When pressed, the unit will constantly operate in
Ion Control Mode.
The Plasmacluster Ion Indicator Light is green.
(CLEAN)
When pressed, the unit will constantly
operate in the Clean Mode, in which
the same numbers of positive and
negative ions are discharged. The
Plasmacluster Indicator Light is blue.
E-10
REMOTE CONTROL OPERATION
OPERATION
Operations available with
the Remote Control
AUTO
MANUAL
POLLEN
OFF TIMER
15 min. HIGH
LIGHTS ON/OFF
Plasmacluster Ion mode
selections
AUTO
CLEAN
ION CONTROL
OFF
OFF
The generation of ions will be
ceased and the Plasmacluster
Indicator Light will go out.
Loading ...
Loading ...
Loading ...