Loading ...
2
ASSEMBLY STEPS
PACKAGE CONTENTS
TOOLS NEEDED
8.8lbs
(4kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
A (x1)
Telescopic
Crossbar
B (x1)
Pole
C (x1)
VESA Plate
M-A(x4)
M5x14
M-B (x4)
D5 Washer
I (x1)
M5xM6
Wrench
D (x1)
Tray
E (x4)
Pad
G (x1)
4mm Allen
Wrench
H (x1)
6mm Allen
Wrench
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do
not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly
or inappropriate use.
M-C (x4)
M5 Lock Nut
STEP 1
STEP 2
Assemble the VESA plate (C) to the tray (D) using M5x14 screws (M-A) with washers (M-B) and
M5 lock nuts (M-C). Use the M5xM6 wrench (I) with a Phillips screwdriver to tighten.
F (x1)
Security
Strap
WARNING
THIS MOUNT IS INTENDED FOR USE WHILE WALKING.
DO NOT ATTEMPT TO RUN WHILE USING LAPTOP, AS THIS MAY LEAD
TO SERIOUS INJURY.
WARNING: CHOKING HAZARD
CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
SMALL PARTS - NOT FOR
Insert pole (B) into the support bracket on
the telescopic crossbar (A), and tighten with
the 6mm Allen wrench (H). The opening on
the top of the pole should be towards the
right side.
Loading ...
Loading ...