User Manual Versa BLSTVB-000-000 Performance Blender Tamper Genuinem SellerDirect220

Fuse/Overload Protection – The motor is designed to protect itself from overheating. When necessary, the motor will turn itself off.
1. Turn control knob to “Off” and unplug from the electrical outlet
2. Remove jar from base and free blade of any obstructions
3. Press external resettable fuse button on the bottom of the base
4. Wait 30-45 minutes for the unit to cool
If the warning light flashes and the motor will not run with the jar in place, the unit has not cooled sufficiently. Turn the control knob to “Off” and wait another 10-20 minutes before trying again.

Base: First turn the control to “Off” and unplug the power cord. Then wash outside surface with a damp soft cloth or sponge using mild soap and warm water. Never immerse the motor base in water or other liquid.
Jar: Fill the container half full with warm water and add 2 drops of liquid soap.
Close the jar with the lid and filler cap. Turn Speed Dial on a “Low” speed and the increase to “High”. Run for 30-60 seconds. Turn the machine OFF, rinse the jar out with running water then dry.
Lid & Filler cap: Separate the 2 pieces and wash in warm soapy water. Rinse clean under running water, then dry.
NOTE - Do not put lid, filler cap or jar in the dishwasher.