Loading ...
Loading ...
Loading ...
PRINCIPLE OF OPERATION
Cruise control lets you maintain a set speed
without keeping your foot on the accelerator
pedal. You can use cruise control when your
vehicle speed is greater than 20 mph
(30 km/h).
USING CRUISE CONTROL
WARNINGS
Do not use cruise control on winding
roads, in heavy traffic or when the road
surface is slippery. This could result in loss
of vehicle control, serious injury or death.
When you are going downhill, your
vehicle speed could increase above
the set speed. The system does not apply
the brakes.
To help the system to maintain the set speed
when going downhill, downshift to a lower
gear.
Your vehicle speed could decrease below
the set speed when driving uphill.
Note: The system cancels if your vehicle
speed drops below 10 mph (16 km/h) under
the set speed when driving uphill.
E265860
The cruise controls are on the steering
wheel. See Cruise Control (page 82).
Switching Cruise Control On
E265296
Press the toggle button upward.
E71340
The indicator appears in the
information display.
Setting the Cruise Speed
Drive to the desired speed.
E265306
Press the toggle button upward or
downward to set the current
speed.
Take your foot off the accelerator pedal.
Note: The indicator changes color.
Changing the Set Speed
E265306
Press the toggle button upward or
downward to increase or decrease
the set speed in small increments.
Press and hold up or down to accelerate or
decelerate, respectively. Release the button
when you reach the desired speed.
Press the accelerator or brake pedal until
you reach the desired speed. Press the
toggle button either direction.
Note: If you accelerate by pressing only the
accelerator pedal, the set speed does not
change. When you release the accelerator
pedal, your vehicle returns to the speed that
you previously set.
207
MKT (TP4) , enUSA, Edition date: 201803, First-Printing
Cruise Control
Loading ...
Loading ...
Loading ...