Loading ...
Loading ...
Loading ...
9 Trouble-shooting
Resetting the saturation indicator for the activated charcoal filters
▸ In the display, touch the activated charcoal filter .
– The «Filter» menu is displayed.
▸ Reset the filter as described (see page 25).
Filter
Reset activated
charcoal filter
Alternatively, the saturation indicator can also be accessed via the «Filter» menu of
the range hood.
9 Trouble-shooting
You may be able to trouble-shoot the following errors yourself. If not, note down the error
message in full and the serial number (SN), which can be found on the identification
plate, and call Customer Services.
Malfunction Possible cause Solution
Continuous activation
Release or clean button
▪ A button was touched for
longer than 10seconds.
▪ There is boiled-over food
on the control panel.
▸ Remove the object or liquid
from the display.
▸ The appliance can be used
again as normal.
Repeated activation
Release or clean buttons
▪ Object (e.g. pan, dish) on
the control panel.
▪ There is boiled-over food
on the control panel.
▸ Remove the object or liquid
from the display.
▸ The appliance can be used
again as normal.
flashes. ▪ The excess temperature
protection of a cooking
zone was triggered.
▸ Allow the cooking zone to
cool down.
▸ Continue cooking on a dif-
ferent cooking zone.
▸ Check cookware.
and «0» flash altern-
ately
▪ The automatic safety shut-
off was triggered.
▸ Switch the cooking zone
back on again if required.
If a cooking zone has been running for longer without any settings being changed,
the appliance switches the cooking zone off automatically, after how much time de-
pends on the power level set.
Power level /
function
1 2 3 4 5 6 7 8 9
Safety shut-off
after hrs.:mins.
2:00 8:30 6:30 5:30 4:30 3:30 3:00 2:30 2:00 1:30
32
Loading ...
Loading ...
Loading ...